Installation Sheet

8 | Wolf Customer Care 800.222.7820
To mount the internal blower on the front of the downdraft
but discharge from the rear:
1 Remove the blower from the blower box.
2 Mount the blower motor to the downdraft using the two
screws provided.
3 Remove the blower plug from the downdraft receptacle
and insert it into the blower receptacle. Refer to the illus-
tration below.
4 Once the plug is installed and the blower secure, install
the blower box to the downdraft using the four screws
provided.
5 Remove the 6" (152) collar from the blower box and solid
cover from the rear of the downdraft, then reinstall the 6"
(152)
collar on the rear and solid cover on the blower box.
Refer to the illustration below.
Installation
INTERNAL BLOWER
To mount the internal blower on the front or rear of the
downdraft:
1 Rotate the blower box so the 6" (152) round discharge
is properly located, then disconnect the cable from the
downdraft receptacle and connect it to the blower recep-
tacle. Refer to the illustrations below.
2 Once the blower connection is made and the discharge
properly located, secure the blower to the downdraft
using the four screws provided.
INSTALLATION
DOWNDRAFT
RECEPTACLE
BLOWER
RECEPTACLE
COVER
COLLAR
Blower mounting. Install cover.
DISCHARGE
DOWNDRAFT
RECEPTACLE
BLOWER
RECEPTACLE
Left, right or bottom discharge. Blower connection.