Specifications
8
WOLF INDUCTION COOKTOPS
FRAMED MODEL CT36I/S
The illustrations below provide installation
specifications for Model CT36I/S.
For ease of installation, 39" (991) cabinets
are recommended for installation of Model
CT36I/S.
A Wolf 30" (762) or 36" (914) built-in single
oven may be installed below Model CT36I/S.
For this installation, unless you are using
cabinets deeper than 24" (610), it is recom-
mended that the electrical supply be placed in
the base cabinet to the right of the oven.
Refer to installation instructions provided with
the built-in oven for additional specifications.
If Model CT36I/S is installed above cabinets,
the electrical placement is not critical. A
grounded electrical box should be located
within 4' (1.2 m) of the right rear of the
cooktop.
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
18"
(457)
19
1
/4" (489)
COOKTOP CUT-OUT
DEPTH
2
1
/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330)
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
24"min
(610)
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from
rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
34
3
/8" (873)
COOKTOP CUT-OUT WIDTH
34
3
/8" (873)
COOKTOP CUT-OUT WIDTH
39" (991)
RECOMMENDED CABINET WIDTH
36"min (914)
36-INCH OVEN OPENING
3
3
/4"min (95)
2
1
/2"min
(64)
FRONT OF COUNTERTOP
19
1
/4" (489)
COOKTOP
CUT-OUT DEPTH
2"**
(51)
4
1
/2"
(
114
)
10"
(254)
3
1
/2" (89)
E
Overall Dimensions
Countertop Cut-Out
21"
(533)
OVERALL
DEPTH
36" (914)
OVERALL WIDTH
TERMINAL BOX
3
1
/2" (89)
4
1
/2" (114)
MODEL CT36I/S
Overall Width 36" (914)
Overall Height 3
1
/2" (89)
Overall Depth 21" (533)
Minimum Cabinet Depth 22
3
/4" (578)
Minimum Height Clearance* 4
1
/2" (114)
Cut-Out Width 34
3
/8" (873)
Cut-Out Depth 19
1
/4" (489)
INSTALLATION SPECIFICATIONS – MODEL CT36I/S
*Minimum 6" (152) clearance is required
between countertop and any combustible
surface directly below the cooktop.
For detailed terminal block dimensions,
refer to the illustration on page 5.
Dimensions may vary to
±
1
/8" (3).