Specifications
7
Dimensions in parentheses are in
millimeters unless otherwise specified.
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
18"
(457)
19
1
/4" (489)
COOKTOP CUT-OUT
DEPTH
2
1
/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330)
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
24"min
(610)
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance
from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
3
3
/4"min
(95)
30-INCH OVEN OPENING
4
1
/2"
(
114
)
10"
(254)
3
1
/2" (89)
E
28
3
/8" (721) COOKTOP
CUT-OUT WIDTH
28
3
/8" (721)
COOKTOP CUT-OUT WIDTH
FRONT OF COUNTERTOP
2
1
/2"min
(64)
19
1
/4" (489)
COOKTOP
CUT-OUT DEPTH
33" (838)
RECOMMENDED
CABINET WIDTH
30"min (762)
2"**
(51)
Overall Dimensions
Countertop Cut-Out
21"
(533)
OVERALL
DEPTH
30" (762)
OVERALL WIDTH
TERMINAL BOX
3
1
/2" (89)
4
1
/2" (114)
FRAMED MODEL CT30I/S
The illustrations below provide installation
specifications for Model CT30I/S.
For ease of installation, 33" (838) cabinets are
recommended for installation of Model
CT30I/S.
A Wolf 30" (762) or 36" (914) built-in single
oven may be installed below Model CT30I/S.
For this installation, unless you are using
cabinets deeper than 24" (610), it is recom-
mended that the electrical supply be placed in
the base cabinet to the right of the oven.
Refer to installation instructions provided with
the built-in oven for additional specifications.
If Model CT30I/S is installed above cabinets,
the electrical placement is not critical. A
grounded electrical box should be located
within 4' (1.2 m) of the right rear of the
cooktop.
MODEL CT30I/S
Overall Width 30" (762)
Overall Height 3
1
/2" (89)
Overall Depth 21" (533)
Minimum Cabinet Depth 22
3
/4" (578)
Minimum Height Clearance* 4
1
/2" (114)
Cut-Out Width 28
3
/8" (721)
Cut-Out Depth 19
1
/4" (489)
INSTALLATION SPECIFICATIONS – MODEL CT30I/S
Dimensions in parentheses are in
millimeters unless otherwise specified.
*Minimum 6" (152) clearance is required
between countertop and any combustible
surface directly below the cooktop.
For detailed terminal block dimensions,
refer to the illustration on page 5.
Dimensions may vary to
±
1
/8" (3).
INSTALLATION INSTRUCTIONS