Specifications

2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
18"
(457)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
39" (991)
RECOMMENDED CABINET WIDTH
36"min (914)
36-INCH OVEN OPENING
36
1
/8"** (918)
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
34
3
/8" (873)
COOKTOP CUT-OUT WIDTH
1
5
/16" (33)
RADIUS
FRONT OF COUNTERTOP
2
7
/16" (62)
19
3
/8" (492)
COOKTOP
CUT-OUT DEPTH
1
9
/16" (40)
21
1
/8"** (537)
RECESSED AREA
FOR FLUSH MOUNT
INSTALLATION ONLY
7
/16" (11) RADIUS
**Minimum dimension, but may be exceeded by up to
1
/ 8 " (3).
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
5
/16"
(
8
)
7
/8"
(22) max
COUNTERTOP
PROFILE
SEE COUNTERTOP
CUT-OUT BELOW
13" max
(330)
24"min
(610)
SEE COUNTERTOP
CUT-OUT BELOW
2"* (51)
4"min (102)
E
10"
(254)
4"min (102)
TO OVEN
OPENING
3
1
/2" (89)
4
1
/2" (114)
21"
(533)
OVERALL
DEPTH
36" (914)
OVERALL WIDTH
5" (127)4" (104)
TERMINAL BOX
11
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION INSTRUCTIONS
UNFRAMED MODEL CT36IU
The illustrations below provide installation
specifications for Model CT36IU.
For ease of installation, 39" (991) cabinets are
recommended for installation of Model CT36IU.
A Wolf 36" (914) built-in single oven may be
installed below Model CT36IU. For this installa-
tion, unless you are using cabinets deeper than
24" (610), it is recommended that the electrical
supply be placed in the base cabinet to the right
of the oven. Refer to installation instructions
provided with the built-in oven for additional
specifications.
If Model CT36IU is installed above cabinets,
electrical placement is not critical. A grounded
electrical box should be located within 4'
(1.2 m) of the right rear of the cooktop.
For Model CT36IU installation options, refer
to Unframed Installations on pages 12–13.
IMPORTANT NOTE: For flush mount applica-
tions, it is recommended to measure the
cooktop glass before cutting the countertop to
ensure a proper fit. Small variances may exist
between the template and the cooktop.
Overall Dimensions
Countertop Cut-Out
MODEL CT36IU
Overall Width 36" (914)
Overall Height 4" (102)
Overall Depth 21" (533)
Minimum Cabinet Depth 22
3
/4" (578)
Minimum Height Clearance* 5" (127)
Cut-Out Width 34
3
/8" (873)
Cut-Out Depth 19
3
/8" (492)
INSTALLATION SPECIFICATIONS – MODEL CT36IU
*Minimum 6
1
/2" (165) clearance is required
between countertop and any combustible
surface directly below the cooktop.
For detailed terminal block dimensions,
refer to the illustration on page 5.
Dimensions may vary to
±
1
/8" (3).