knob kit_instruction_sheet

CONTENTS
Knobs
Note: Depending on the model, certain knobs may be
included with this kit but not used.
TOOLS REQUIRED
Phillips screwdriver
INSTALLING KNOBS
1 Remove the knobs from the packaging, and discard
the packaging material.
2 On the unit, use the icon etched next to each bezel to
determine the correct placement of each knob.
ICON FEATURE KNOB TEXT
Sealed burners
OFF
HI - LO
Simmer HI - LO
Infrared griddle
100 to 450
Infrared charbroiler
OFF and HI
French top
OFF and HI
Wok
OFF, LO, and HI
3 Discard any additional knobs that are not necessary
for the unit.
4 Test pushing in and turning the knobs. If any of the
knobs "stick" when pressed, remove the knob and
slightly loosen the two bezel screws. When the
alignment is correct, tighten the screws and install
the knob.
CAUTION
Do not attempt to clean knobs or bezels in a
dishwasher. Do not soak or use abrasive cleaners. To
clean knobs or bezels, wipe with a damp cloth and
mild detergent and water. Rinse and dry.
Sealed Burner Rangetop Knob Kit
wolfappliance.com 800.222.7820
828208 REV A 07/2019
Page 1 of 1
*828208$REV$A*