CONTENTS Product Outs vos om su Amos pss a oss sme os 2 Pessaries dnd Packages ooo & Specification Sheeting Assembly Son a Operation AA AAA 9 Operation Motlegssooomss oss is 50 Pulse Function ore ams sss one 1 Automatic Leveling wos FE Ga Livelong Adderley «ee rma Eg Influences on Accuracy-s oom CER 13 Calibration: CEs hsv mamas er ar BOs 14 Horizontal Hoe cheeking mama im 14 Vertical life Checking rormomssmssmmmer sms monsoons 16 Working Advice ems {1 Working HATTING I Bs 19 Cleaning Fochmmendanigneinn Ja
Beria De Le Vertical 360° inc exit window Vi 2. Vertical 360° line exit window V2 3. Horizontal 360° hme exit window H 4, Pulse function button for indoors/outdaors switch 5. Vomit button &. 1 hoed button 7. Power supply port/USB 8. ON/B/OFF switch 9: Tripod Bracket mount 4” 10.
Lessees Self-leveling Range 437 Accuracy Empathize 330 (2mm) Him) Number of Lines & 19 Lines, 360° Range Wave Length 518m (Green Laser) Laser Safety Class Class 2M : 650 (20m) or Working Range 1656: (50m) with detector Power Supply STAY-2000mAh Li Battery Battery Life 6 hairs Operating 4-115 Temperature (AIP C4570) Waterproof! Rustproof P34 Dimensions S1%3. 55.0 120mm) Net Weight 121 Ib) 0.
Sl Inserting the Battery Lithium Battery 74V-2000mAh is recommended forth device. Open the battery bid 10:up and insert the lithium battery 16. When the lithium battery is weak, a single audio signal will sound every two panties. 10t continues work, the beeping signal will sound vapidly whether Hindu battery vets weaker Take out the Hitler battery and charge it with charger; charging line and plug, 4 Do not charge when the lithium battery is inside the:device.
un 4 It's being charged when the ved light on in the charger 4 Charging is completed when the green ght Ronda the charger 4 Tt takes 8 hours to complete charging AA fully charged Pithiness battery can last 6 hours working with all laser lines on 4 Remove the lithium battery from the device when not using it for extended periods.
Ge Initial Operation A Protect-the device against moisture: and direct sunlight 4 Do not place the device in extreme temperatures ov variations in temperature. The extreme temperateness of secularization make the accuracy of the device influenced 4 Avoid heavy Impact or high falling of the device. Allen heavy infraction high falling of the device, it's necessary {or inaccuracy check before continuing tor work: (See “Leveling Aceurey™) 4 Switch the device off during transport.
After cooling down, the device is ready for working and can be switched on again 4 Dotson leave the switched-on device unattended und switch it off after use. Other persons. could be bothered by the laser bean, ea You can switch the operating button § or6 to choose the mode you need.
Pulse Function When you week outdoors with the device, usually yow need i receiver th detect the laser beam from very far distance, eu. 1650/50 The receiver 1s am optional accessory and not in the package, To ban pulse mode: press ® button 4. Whe pulse function switched on; the visibility of the laser beam 1s reduced for the human eyes. Nothings frequency; the Taser beans will be detected by the receiver even far firm 165H/50m or under the sunlight when the human eyes can’t see the laser beam clearly.
IRE Working with Automatic Leveling Position the device on the ground iron 4 iPod. When working with automatic leveling, push the On/OHf switch 8 10 the “On” position.
Lo hae ee Te) ea The ambient temperature has the greatest influence. Device specific influences (such as heavy impact or falling down) can lad to deviations.
& ei cel eh Check the calibration of the laser before use. I. Mount the device onto tripod, or place ton a firebrand level surface as close as toa wall The distance between tweet wally is supposed to be 5 meters. Turn on the device with automatic leveling, Select line mode with one horizontal and tote vertical planes, Mark point Aon the wall, Point A should be the center of the pot where the laser lines cross cache other at the wall, Turn the device by [80° and mark point B on the other wall.
Calibration check & Horizontal line checking 3. Without turning the device, position if as. close as tithe other wall, Switch it on with one horizontal and one vertical planes and allow it to level in. Adjustment height of the device in such a manner that the cross point of the laser lines 1s projected against the previously marked point B 4.
Vertical line checking Le Choose mall and settee device Sm away from the wall 2. Mark point A on the wall, Please make the distance farm: point Ato the ground to be 3m. Hang a plumb hing from point Dorothea ground and find a:plumb point B on the ground 3. Turn on the device and make a vertical laser ling 1 meet point Boa long the vertical laser line on the wall measure the distance 3m from point B fo another point C. Point € must Devon the vertical laser Hoe.
airs Working with the Laser Target Plate The laser target plate 13 increases the visibility of the laser beam under unfavorable conditions and at large distances: The reflective part of the laser target plate 13 improves the visibility of the Taser ling: Working with the Tripod (concluded accessory) The tripod is not included in the package. For the lest purchased tripod, if the mount 15 5/87, please use 12 Adapter 14" Male to 5/8" Female to connect the device.
LET LT Working with the Laser Receiver (non-included accessory) The laser receiver/laser detector is vot included in the package: Laser Receiver RODGER mismatched for this device: Under unfavorable light conditioning environment, direct sunlight) and for large distances, use the laser receiver for an improved finding of the Taser Hines.
Cleaning recommendations a It is cleaned vse damp cloth with soap and water. The plastic parts should never be cleaned with any solvent: A Neither strong detergents nor any hash-chemicals should he used to clean the tool: The device should not be dipped Tito: the water: directly & Cleaning of the laser lent should be done using 4 soft cloth with a few drops of glass cleaner Maintenance Proper calibration of a laser level is the crucial partials maintenance. This determines.
ele oe BT WARRANTY The Overdevelop is covered by our 12 months warranty against defective workmanship or faulty pars commencing on the date that the product was purchased. Please ream this form and a copy of your receipt as proof of purchase. This receipt must be presented when making a claim: Our corporation warrants that the laser level product will be free {from inherent defects in materials and workmanship for the tor. The Warranty ceases if The original serial number Is removed or tampered with.
