User manual

RM-3358W User Manual P/N 821575 Rev-C Section 1: General Features and Specifications

Installation

Unpacking

Unpack the unit from the shipping container and inspect all articles for shipping damage. If you find any damage, notify the

shipping carrier immediately for claims adjustments. Compare the shipping box contents to the packing slip. Contact our

PANORAMAdtv sales representative if there are any unexplained shortages.

Cooling and Airflow

No special physical mounting considerations are necessary regarding unit heat dissipation except under adverse conditions. Provided

the ambient temperature inside the mounting enclosure does not exceed 40 degrees Celsius (104 degrees Fahrenheit), adjacent devices

can be rack mounted (or stacked) in proximity to the RM-3358W unit. If the above temperature is exceeded, allow a 1RU (1.75”/

25mm) space above and below the unit for air circulation.

Rack Mounting

The RM-3358W unit rack mounts in a standard EIA-310-D specification 19”/483 mm rack and needs 3RU of space. Allow

sufficient space at the unit rear for connector and cable clearance (approximately 4”/102mm). The RM-3358W unit rack mounts

from the front panel support rails. Rear support is not required. See page 14 for a top view of the unit showing width and depth

clearance dimensions.

General Installation Recommendations

Recommended Cables: Recommended cable type for Composite (analog) or SDI video signals is: Belden 1694A (or equivalent).