User guide

Part Number: Document Title User Guide

RM-3270W HD Series User Guide

Front Panel Controls

• Speakers: Audio may be selected for monitoring through the left

and right speakers.

• Power: Each of the two Power buttons turn the associated LCD

screen on and off; the LED glows green to indicate on. When the

indicator above the power switch is green then the unit is receiving

power. When the indicator is flashing, the unit is in stand-by mode.

•

In A/B: These two buttons switch between signal inputs.

• Scan: The Scan button toggles between the full video signal view

(underscan mode) to a typical display visible on a customer’s

monitor (normal mode). The LED glows green to indicate

underscan.

• Aspect: This button toggles the aspect ratio between 4:3 and 16:9

for the associated LCD screen. It has no affect on HD widescreen

formats.

• User 1 through User 3 or F1 though F3: The User/F buttons are

programmable as hot keys for parameter adjustments.

•

Menu: Press this button to display the OSD MENU. See Using the

OSD Menu on page 12 for more details.

• Blue/Down: The Down function is on the same button as the

Blue function. When the OSD MENU is displayed, this button

navigates down through the menu and sub-menu selections. When

the OSD MENU is not displayed, pressing this button initiates Blue

mode.

Note:

The left LCD must be turned on for audio to function

from either the left or the right screen, because the

audio amplifiers are powered from the left LCD.

Therefore, if only one screen is to be used, be certain

that it is the left one.

Note:

The In A/B buttons are only available on the 2HD.

Note:

The Aspect button is not available on the

RM-3270W-2HD.