User guide

RM-2435-HD User Guide

Programming the Hot Key Buttons

2. VOLUME: This option regulates the volume from -30db to 0db.

BRIGHTNESS: This option regulates the video brightness from

-116 to 139, where 0 is the typical value.

4. CONTRAST: This option regulates the image contrast from -128 to

127, where 0 is the typical value.

5. SATURATION: This option regulates the color saturation of the

image from -128 to 127, where 0 is the typical value.

6. SHARPNESS: This option regulates the sharpness of the image

from 0 to 15, where 0 is the typical value.

7. HUE: This option regulates the hue of the image from -32 to 31,

where 0 is the typical value.

The User Button

You can use the User button as a hot key. Assigning a parameter to this

button allows that parameter to be displayed and adjusted on-screen at

the press of the button without displaying and navigating through the

OSD Menu.

To program the hot key:

1. Press and hold the Menu button.

2. Use the Up and Down buttons to find the

CONFIG sub-menu and

press the Enter button to select it.

3. Use the Up and Down buttons to cycle to the User selection and

press the Enter button to select it.

4. Use the Up and Down buttons to select the following eight

parameters. Press the Menu button to exit the sub-menu. (Refer to

Table 1–2 starting on page 12 for the domain range for each of

these parameters.)

• H/V DELAY

Note:

By selecting the DEFAULT option in the CONFIG sub-menu,

you can reset the parameters of the BRIGHTNESS,

CONTRAST, SATURATION, SHARPNESS

, and HUE options

to zero (0).