User guide

RM-2435-HD User Guide

Rear Panel Connectors

Figure 1–3 RM-2435-HD Rear Panel

• HD/SD-SDI Output: The system re-shapes and re-clocks an HD/

SD-SDI signal before outputting it to this female BNC connector.

• HD/SD-SDI Input: This auto-detecting, input connector accepts

HD/SD-SDI or analog CVBS video signals. The inputs comply with

SMPTE259M, SMPTE292M/ITU-R BT601. Composite video inputs

comply with SMPTE-170M.

• RS-485: Reserved for future use.

• Power: To provide power to the unit, attach the supplied 100 to

240VAC to 12VDC power supply to this connector.

• Tally Interface: This DB-9 connector controls the tally lights on the

front panel. Refer to Figure 1–4 below for the pin out.

Figure 1–4 Rear Panel DB-9 Connector Pin Out

HD/SD-SDI Input Connector

HD/SD-SDI Output Connector

Power Connector

Tally Lights Interface Connector

RS-485