User guide

8 21 068: M P E G-3 27 0 & 4290 Use r Guide

Ch apt e r 5 Specifications

Sp ec ific at ion s

Compliance

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

HDMI

525i - NTSC

625i - PAL

525i - PAL-M

720 x 480i (59.94)

720 x 576i (50)

720 x 480p (59.94)

720 x 576p (50)

1280 x 720p (60/59.94/50)

1920 x 1080i (60/59.94/50)

640 x 480 (60)

800 x 600 (60)

1024 x 768 (60)

1280 x 1024 (60)

1600 x 1200 (60)

1920 x 1080p (60/59.94/50/30/29.97/

25/24/23.98)

TS Protocols

SPTS/MPTS-ASI, Unicast-IP/IGMP

UDP/RTP

MPEG Video (ASI/IP)

100 kbs - 30 Mbps CBR, MPEG-2 4:2:0

MP @ML/HL/HP, MPEG-4

4:2:0 (H.264 MP/LP to L4.2)

MPEG Audio

MPEG-1/2 Layer II, AAC-LC 16-384

kbps

Table 5–4 Acceptable Signal Input Formats

Category Signal Types