User guide

8 21 068: MP E G-3 2 70 & 4 290 Use r Guide

Ch apt e r 4 Co nfi gu ra tio n

Pre se t M e n u

Figure 4–11 Preset Menu

Rotate the Volume knob to highlight the item to be adjusted, and then

press to enter it. Again rotate the Volume knob to the option selection

and press to choose it:

1. Save Preset to: To save the current MPEG-3270 or MPEG-4290

screen configuration select one of the six preset locations and press

the Volume knob. As you rotate through each numbered preset,

its name (if any) will appear in the Preset ID option on this

menu.

2. Load Preset from: To recall a preset configuration from one of

the six preset locations to the current MPEG-3270 or MPEG-4290

screen configuration, select one of the presets and press the

Volume knob. As you rotate through each numbered preset, its

name (if any) will appear in the Preset ID option on this menu.

Alternatively, you may select Factory to recall the original factory

configuration for each screen.

3. Display Preset ID: If you have entered an Preset ID for the

currently recalled Preset, you may display this ID on the screen.

This option sets this display option On or Off. By default, it is On.

4. Preset ID Position: This option sets the screen location for the

Preset ID, if you have entered one and if the Display Preset ID

option in this menu is On. Six locations are offered and Bottom is

selected by default.

5. Copy All Presets to: It can be convenient to configure one of the

MPEG-3270 or MPEG-4290 screens and then simply duplicate this

Load Preset from

Preset Menu

Off OnDisplay Preset ID

Preset ID

Engineering Lab Save Preset ID

A B C D E F G H I J K L M

N O P Q R S T U V W X Y Z

# + -

@0 1 2 3 4 5 6 7 8 9 % =

? :

[ ]

( )

Save Preset to 1 32 4 5 6

1 32 4 5 6 Factory

Preset ID Position T Left T RightTop BottomB Left B Right

Copy All Presets to 1 32 4

Shift Space BkSp DoneClear Restore