User guide

8 21 068: M P E G-3 27 0 & 4290 Use r Guide

Ch apt er 4 Configuration

Pr ese t Me n u

to indicate whenever the MPEG-3270 or MPEG-4290 is powered

and turned on.

5. Calibration: If at any time you need to set a MPEG-3270 or

MPEG-4290 screen back to its original factory calibration, this

option can be used.

6. Upgrade: If you have a software upgrade on a flash drive that you

would like to apply to the MPEG-3270 or MPEG-4290, use this

option and then following the instructions that will appear on the

screen.

7. Streamcast: Set this to Unicast or Multicast, depending upon

what will be expected in the stream.

Preset Menu

A Preset is a complete configuration. Each screen can have up to 6

Presets that can be recalled at any time to reconfigure. The Preset

Menu lets you save, recall, and name presets for each MPEG-3270 or

MPEG-4290 screen and is shown in Figure 4–11 on page 44.

To offer you maximum configuration flexibility, you can:

• Name your presets using up to 14 characters.

• Copy one preset to another.

• Copy all presets from one screen to another.

• Restore each preset to its original factory default.