User guide

8 21 068: MP E G-3 2 70 & 4 290 Use r Guide

Ch apt e r 4 Co nfi gu ra tio n

Aud io M enu

2. Audio Scale: One of five audio scales for the level meters may be

selected.

• Extended VU

• VU

• Nordic

• BBC

• DIN

The default is Extended VU.

3. Mode Display: The type of level metering can be chosen. VU/

PPM is the default, causing both the average and peak levels to be

displayed simultaneously. Optionally, PPM (peak) and VU

(average) can be selected to display individually.

4. Meter Size: Larger meters are easier to see, but cover up more of

the video display. The default selection is Large. A Small

(narrower, but same height) selection is available.

5. Meters: By default, the All 16 selection will allow all 16 channels

within an SDI signal to display, with channels 1 – 8 on the left of

the screen and channels 9-16 on the right of the screen. Optionally,

Active 2 can be selected to allow only the two channels that are

selected for listening to display. The two channels will appear in

the same position that they would have been in if 16 channels were

displayed.

6. SDI-A Left Audio: This option allows you to choose the channel

to be heard in the left speaker or headphone when the SDI-A input

is picked. By default, channel 1 is selected.

7. SDI-A Right Audio: This option allows you to choose the

channel to be heard in the right speaker or headphone when the

SDI-A input is picked. By default, channel 2 is selected.

8. SDI-B Left Audio: This option allows you to choose the channel

to be heard in the left speaker or headphone when the SDI-B input

is picked. By default, channel 1 is selected.

9. SDI-B Right Audio: This option allows you to choose the

channel to be heard in the right speaker or headphone when the

SDI-B input is picked. By default, channel 2 is selected.