User guide

8 21 068: M P E G-3 27 0 & 4290 Use r Guide

Ch apt er 4 Configuration

Aud io Me nu

Selecting GPI will allow a GPI input, as set in the GPI-In Menu on

page 39, to select whether Off or On is in effect.

6. Scale Type: Zoom is the default selection. It will enlarge the

image, keeping its aspect ratio, until both the vertical and

horizontal edges reach or surpass the edges of the screen. Selecting

Stretch will enlarge both the vertical and horizontal dimensions

to reach the edge of the screen, without preserving the aspect ratio.

Audio Menu

This menu sets up the audio level meters that can appear on the display

and also defines which audio channels you will hear. The Audio Menu

is shown in Figure 4–4

Figure 4–4 Audio Menu

Rotate the Volume knob to highlight the item to be adjusted, and then

press to enter it. Again rotate the Volume knob to the option selection

and press to choose it:

1. Level Meter Display: Selecting On causes audio level meters to

appear on the screen. Selecting Off causes them to disappear.

Either 2 or 16 meters will appear, as defined by the Meters option

in this menu. Selecting GPI Control will allow an external GPI

input, as set in the GPI-In Menu on page 39, to select whether the

audio meters appear or not. The default is On.

Level Meter Display

Audio Menu

Audio Scale

Mode Display

SDI-A Left Audio

VU Nordic BBC

VU PPM VU/PPM

DIN

1 2 3 4 5 6 7 8

SDI-A Right Audio

Meter Size Large Small

Meters All 16 Active 2

9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

SDI-B Left Audio 1 2 3 4 5 6 7 8

SDI-B Right Audio

9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Ext. VU

Off On GPI