User guide

8 21 068: M P E G-3 27 0 & 4290 Use r Guide
© 20 13 Wo h ler Tec hn ol ogi e s, In c . A l l r ig h ts re se rved.
25
Ch apt e r 3 Operation
MP EG S cr ee n Op er atio n
yellow indicator is shown for any parameters not present in the
stream.
Select the DVB-ASI input using the front panel input select push-
button. Stream sync is indicated in the upper left corner of the monitor.
This will enable the MPEG menu and the PID that will be captured in
stream. The PID table menu displays the PIDs in stream. The PAT
(Program Association Table) menu displays the programs in
stream. Select the program number and the PMT information is
displayed. Select the video/audio to decode.
Figure 3–2 SI PID Screen
The SI PID Screen in Figure 3–2 shows the service information for
each program number. To exit the screen, press the Volume knob.
Figure 3–3 PMT PID Screen
Service Svc Dest Svc Type
No Curr SIT
SIT 31 0x7f
Push to Exit
PrgNum
0
4113
4097
4352
Video H.264 1280 720 119.88 1:1 0x27 HDMV
PCR
Audio AAC Layer 0 0 44.1kHz Stereo Open/Cpy noRA
PMT PID 256 PGM # 1 HDMV No Curr SIT
SEL and Exit EXIT Only Vid-PID 4113 Aud-PID ----