User guide

8 21 068: M P E G-3 27 0 & 4290 Use r Guide
© 20 13 Wo h ler Tec hn ol ogi e s, In c . A l l r ig h ts re se rved.
23
Ch apt e r 3 Operation
MP EG S cr ee n Op er atio n
Ethernet
Pressing this button will display UDP MPEG transport streams
received via the Ethernet connection on the back panel. When this is
selected, the green LED within the Ethernet button glows. To learn
how to set up the Ethernet connection to receive a stream, refer to the
Network Menu on page 45.
SDI/ASI
This button is used in conjunction with the BNC Port A and BNC Port
B selections in the System Menu on page 42. Pressing the SDI/ASI
button repeatedly selects order:
1. BNC Port A: This can be either a 3G/HD-SDI signal or an ASI
signal, as selected in the System Menu on page 42. When Port A is
selected, the A LED lights.
2. BNC Port B: This can be either a 3G/HD-SDI signal or an ASI
signal, as selected in the System Menu on page 42. When Port B is
selected, the B LED lights.
MPEG Screen Operation
The MPEG Screen is accessed through the Menu System, using the
MPEG Menu selection.
The MPEG Screen appears as follows: