User guide

8 21 068: MP E G-3 2 70 & 4 290 Use r Guide

Ch apt e r 2 Qu ick St a rt

Sett in g up In pu ts

3. If it is not connected already, connect the SDI source to SDI/ASI

A IN. Press the SDI/ASI button repeatedly to light the A LED.

SDI A: will be indicated in the upper left corner of the screen.

4. When the SDI signal is recognized, it will appear on the screen.

Monitoring an ASI Stream

1. Press the Menu button to open the Main Menu. Rotate the

Volume knob to highlight the System Menu selection and press

it to enter the System Menu.

2. Turn the Volume knob to BNC Port A and press it once. Now

turn it again to select ASI. Press the Volume knob once to select

ASI. Use the same process for BNC Port B, if you will be

connecting a second ASI stream to SDI/ASI B IN. Finally press

the Menu button twice to exit.

Video Menu

Main Menu

Audio Menu

Marker Menu

Functions Menu

OSD Menu

System Menu

Preset Menu

System Status

GPI-In Menu

Network Menu

MPEG Status

UMD Options Menu

BNC Port B

System Menu

Backlight Interval

Panel LEDs

Calibration

Upgrade

None 5m 4h 8h 24h 48h

Restore

Upgrade

SDI ASI

Off On

BNC Port A SDI ASI