User guide

8 21 068: MP E G-3 2 70 & 4 290 Use r Guide
© 201 3 Wohle r Te chno lo g ie s, Inc. A ll ri g ht s re ser v ed.
4
Ch apt e r 1 Ins tal la ti on
On- Sc ree n D i sp lay Fe at ur es
to the unit. If the temperature is above 104°F (40°C) allow an
additional 1RU 1.75” (44.45mm) space above and below the unit
for air circulation.
DC Power
The MPEG-3270 and MPEG-4290 require 24 VDC at 3 Amps. They
cannot be harmed by accidental reverse connection of power.
On-Screen Display Features
Some of the monitor display features (Figure 1–1) can be rearranged on
the screen as described in this section.
Figure 1–1 Display Features
• Input Signal: The detected input signal type is displayed.
• Area Marker: By default the appearance of the Area Marker is
controlled by the F1 button. Refer to F1 - F6 Buttons on page 26. The
Area marker can be shown in different aspect ratios using the
Marker Menu. Refer to the Marker Menu on page 35.
• Safe Area Marker: By default the appearance of the Safe Area
Marker is controlled by the F1 button. Refer to F1 - F6 Buttons on
Markers:
Input Signal
Audio Level
Meters
Under
Monitor
Display
(UMD)
Area
Center
Safe Area