Manual

Page 24
Source Select
Touching the Source Select selection on the Main Menu proceeds to the Source
Select menu. While the monitored source can simply be selected by rotating the
Source knob on the front panel, this menu is provided to show all of the possible
sources. The selected source is shown in a light color. You may simply touch
another source in this menu to switch to it. This screen also shows sources which
are unlicensed and therefore nonfunctional. These sources are shown in a gray
color. To license these sources so that they may be used, contact Wohler
Technologies. Figure 2-18 shows the Source Select Menu.
Figure 2-18: Source Select Menu
Touch Menu to exit this menu.
If you touch MADI BNC, MADI Optical, or SFP, an additional selection screen will be
shown, asking you select which 16 MADI channels to monitor or which SFP
functionality to monitor. These screens are shown in Figure 2-19.
Figure 2-19: MADI or SFP Selection Screens:
Touch Back to return to the Source Select menu or touch Menu to return to the
Main Menu.