Manual

Page 19
Speaker Options
Touching the Speaker Options selection on the Unit Settings Menu screen
proceeds to the Speaker Options screen. The controls on this screen affect
various characteristics of the monitored audio as heard on the iVAM1-1. This screen
is shown in Figure 2-13.
Figure 2-13: Speaker Options Screen
Speaker Options
Speakers
Never
Mute
Always
Mute
Treble
0 dB
Bass
0 dB
12-12
Mute
w/ HP
Back
The controls function as follows:
1. Treble: This tone control adjusts the high frequency speaker audio response
from -12 dB to +12 dB. Lowering Treble compensates for high frequency
pre-emphasis or removes sibilance effects. Increasing Treble will add
“sizzle” to the sound and bring high-pitched sounds out of the mix. The
control can be touched and moved left or right to adjust in 2 dB increments.
After touching the Treble control, the Channel knob can also be turned to
make the adjustment.
2. Bass: This tone control adjusts the low frequency speaker audio response
from -12 dB to +12 dB. Lowering Bass will unmask midrange band sounds,
while increasing Bass will make the sound “fatter”. The control can be
touched and moved left or right to adjust in 2 dB increments. After touching
the Bass control, the Channel knob can also be turned to make the
adjustment.
3. Speakers: This setting controls whether the monitor speakers are never
muted, muted while a headphone plug is inserted into the headphone jack on
the front panel, or always muted.
Touch Back to exit this screen.