Manual

Page 16
Video Screen
Pressing the Source knob alternates between the Video Screen and the Meter
Screen on an SDI source. Information about the signal can be superimposed over
the upper part of the video image. The Video Info selection in the Unit Config
Menu determines whether this information is always displayed, never displayed, or
is only displayed for the first 5 or 10 seconds after switching to the video screen.
Figure 2-9 shows the Video Screen.
Figure 2-9: Video Screen
1. Video Source: This translucent box displays the input source of the video
signal.
2. Video Signal: This translucent box displays the resolution and frame rate
of the video signal.
Note: If the Video Source and Video Signal displays have been optioned
to disappear after 5 or 10 seconds and you wish them to reappear, simply
touch the video screen.