Technical data

Settings
52
11 Settings
 When the meter is off, hold down the ON/OFF key for more than 1 second to enter
the setup mode.
 Press HOLD to switch from one setup mode to the next one (from P10 to P20 etc.).
Press the M/AVG key to go to the parameter that you want to change. Press
HOLD/▲ or M▼ to select.
 In P10 to P60 mode press START/ESC to escape and enter the measuring mode.
In the different modes of the Wöhler KM 410, different parameters can be set.
Mode Parameter
P10 delete stored data
P20 enter the CO alarm threshold
P30 select the temperature unit
P40 set the sampling rate of data logging
P 50 enter the air pressure
P60 select the time format as 12 hours or 24 hours
date and time