User manual

5
© 2005 PANORAMAdtv ALL rights reserved
AVMFlex-SA Series User Manual P/N 821624 Rev-A
Applications
AVMFlex-SA General Specifications
Section 1: General Features and Specifications
The AVMFlex-SA Series is ideally suited for use in VTR bays, mobile production vehicles, teleconferencing installations,
multimedia systems, satellite link and cable TV facilities, and on-air radio studios. Designed and manufactured in the U.S.,
the AVMFlex-SA Series is backed by a strong warranty and a satisfaction guaranteed return policy.
Audio Inputs:
Audio Input Impedance:
Audio Outputs:
Peak Acoustic Output
@2 feet:
Frequency Response
(1/6 Octave):
Power Output:
Electrical Distortion:
Hum and Noise:
Analog: x2 XLR (female, 3-pin)
SDI: x1 BNC (embedded with video)
Analog: >40k Ω, balanced
SDI: 75 Ω, unbalanced
A
nalog Output of Selected: x2 XLR-M
Analog Output from SDI: x2 XLR-M
98dB SPL
80 Hz to 20 Hz (+/- 5 dB)
(-10 dB @ 50 Hz, 22 kHz)
RMS each side = 5W, 7W peak
RMS dual woofer = 11W, 16W peak
<0.15% @ any level below input
threshold
Better than -68 dB below full output
SDI Input Characteristics:
Receiver type:
Sensitivity performance:
Input formats:
Audio sampling rate:
SDI output type:
SDI output:
SDI output level:
Max. output of analog out:
THD (full output):
D to A gain calibration,
(dB = dBFS):
SDI Lock Indication:
75 Ohm (BNC), AC coupled, 15 dB
minimum return loss, 10-270 MHz
Auto equalizing with clock regeneration
Tolerates cable loss of at least 30 dB @
135 MHz
Component, either 525 or 625 lines w/
48 KHz audio
48 KHz
Fully regenerated copy of SDI input
signal (equalized and regenerated,
scrambled NRZI)
400 - 700 ps
750 - 850 mv
+24 dBv (0 dBv = 0.775 vRMS)
Less than 0.008%
+8 = -20, +4 = -20, +6 = -9, 0 = -18
(DIP switch selectable)
Red LED,
Off = not locked
Red = locked
Video Input Format:
Video Input Connectors:
Video Input Termination:
Video Output Connectors:
Video Display Modes:
Video Display Type:
Video Picture Controls:
Video Color Configuration:
Magnetic Shielding:
Power Supply:
Dimension (h x w x d)
(chassis only):
Weight (chassis only):
CVBS (Composite Analog) video
SDI video (with audio embedded)
CVBS: x1 BNC
SDI: x1 BNC
CVBS: 75 Ω (Ohm), selectable
SDI: 75 Ω (Ohm)
CVBS: x1 BNC (passive loop-thru)
x1 BNC (from SDI Input)
SDI: x1 re-clocked (regen.) output
NTSC/PAL autosensing
Active Matrix TFT-LCD
Brightness, contrast, color,
and tint (NTSC only)
RGB delta
<1 gauss any adjacent surface
Internal 100 to 240 VAC, 50-60 Hz
1.75 x 19 x 10 inches
44.5x 483 x 254 mm
9.5 lbs. (4.3 kg) w/ 6.8 VPOD
0 dbu ref. 0.775V RMS. Features and specifications subject to
improvement without notice.
Audio Response
Typical 1/6 Octave Audio
Response Curve
B
d
0
-10
-20
-30
+10
Hz
10k5k2k1k50020010050 20k20