User manual

19
© 2005 PANORAMAdtv ALL rights reserved
AVMFlex-SA Series User Manual P/N 821624 Rev-A
VPOD Gooseneck Length Adjustment
Figure-3d: VPOD Gooseneck Length Adjustment
The VPOD LCD display module may be adjusted for two lengths (1.3" and 2.25") by changing the location of two screws on the bottom of
the chassis which are lined up with the VPOD module. To change the length:
Locate the adjustment holes on the bottom of the main chassis that correspond with the VPOD module.
Remove the two (2) installed screws and set aside for later use.
Carefully pull or push the VPOD module until the two holes of the internal gooseneck mount line up with the appropriate two holes
in the chassis bottom. Ensure that the LCD display screen is not touched or otherwise damaged during this operation.
Reinstall the two screws removed in step 2 into the new position.
1)
2)
3)
4)
CAUTION: Do NOT rotate (twist) the VPOD module around the gooseneck axis; the torque
may damage the gooseneck and/or internal wiring. Also, avoid touching the LCD video screen
itself with the fingers or other objects.