User manual

17
© 2005 PANORAMAdtv ALL rights reserved
AVMFlex-SA Series User Manual P/N 821624 Rev-A
SYSTEM SETUP
To enter the System Setup submenu, choose SYSTEM SETUP in the Main Menu, and press the MENU button.
Use the UP and DOWN buttons to select System Setup option as shown below.
VPOD5W On-Screen Display Controls (AVMFlex-SA/5W Only)
(Continued)
DIMMER 8
POWER SAVING ON
FSC SET 3.58MHz
TINT [NTSC ONLY]
VER. NOR.
HOR. NOR
MODE NORMAL
EXIT
EXIT
SYSTEM SETUP
TINT [NTSC ONLY]
CONTRAST
COLOR
BRIGHT
Main Menu: System Setup Menu:
DIMMER (1-8)
1) Press MENU button to select DIMMER option.
2) Press Up and DOWN buttons to select Dimmer level from 0
to 8.
3) Press MENU to activate selection.
This adjusts the LCD backlight brightness level.
POWER SAVING ON
1) Press MENU button to select POWER SAVING ON option.
2) Press Up and DOWN buttons to select POWER SAVING ON or POWER SAVING OFF.
3) Press MENU to activate selection.
When the display is set up with Power Saving Mode ON, power will automatically turn off after 6 seconds
if there is no video signal entering the display. Power will automatically turn as soon as a video signal is
detected.
FSC SET 3.5MHz
1) Press MENU button to select FSC SET 3.5MHz (Frequency Subcarrier) option.
2) Press Up and DOWN buttons to select FSC SET 3.58MHz or FSC SET 4.43MHz.
3) Press MENU to activate selection.
This option will force the Frequency Subcarrier of the display at 3.58MHz or 4.43 MHz.
HOR. NOR.
1) Press MENU button to select HOR. NOR. (Horizontal Reverse Image) option.
2) Press Up and DOWN buttons to reverse the image horizontally.
3) Press MENU to activate selection.
VER. NOR.
1) Press MENU button to select VER. NOR. (Vertical Reverse Image) option.
2) Press Up and DOWN buttons to reverse the image vertically.
3) Press MENU to activate selection.
MODE NORMAL
1) Press MENU button to select MODE NORMAL option.
2) Press Up and DOWN buttons to select NORMAL, ZOOM1, or FULL.
3) Press MENU to activate selection.
NORMAL mode will display images in original aspect ratio of source (example: 4:3 ratio displayed
undistorted in 16:9 screen with blank space on either side). ZOOM1 mode zooms into center area of
display. FULL mode forces aspect ratio of source to conform to 16:9 aspect ratio (example: 4:3 ratio
displayed in 16:9 screen stretched [distorted] to fill entire display).
EXIT
Press MENU button to select EXIT option, press MENU button again to return to Main Menu.
Section 2: Operatio