User manual

16
© 2005 PANORAMAdtv ALL rights reserved
AVMFlex-SA Series User Manual P/N 821624 Rev-A
VPOD5W On-Screen Display Controls (AVMFlex-SA/5W2 Only)
Display controls for the 5.8" VPOD (VPOD5W) are set via the three buttons on the VPOD front panel (See Item 6, page 10).
Parameters are manipulated as described below:
BRIGHTNESS
Press the UP and DOWN buttons directly to increase and decrease the LCD display BRIGHTNESS. The image below
will be displayed on-screen while adjusting to indicate the level.
COLOR / CONTRAST / TINT
1) Press the MENU button to access the Main Menu onscreen.
2) Press the UP and DOWN buttons to scroll through the options.
3) Press the MENU button to select the chosen parameter for adjustment.
4) Press the UP and DOWN buttons to adjust the level.
5) Press the MENU button to return to the Main Menu.
6) To exit the menu, use the UP and DOWN buttons to select EXIT and then press MENU.
NOTE: The TINT parameter is applicable ONLY when monitoring NTSC video source signals.
The onscreen menu and pamameters for COLOR, CONTRAST, and TINT controls are shown below:
BRIGHT
R
G
B
COLOR
CONTRAST
TINT
BRIGHT
COLOR
CONTRAST
TINT [NTSC ONLY]
EXIT
SYSTEM SETUP
BRIGHT
SYSTEM SETUP
TINT [NTSC ONLY]
CONTRAST
EXIT
COLOR
COLOR
SYSTEM SETUP
TINT [NTSC ONLY]
CONTRAST
EXIT
BRIGHT
COLOR
Adjustment:
CONTRAST
Adjustment:
TINT
Adjustment:
Section 2: Operation
(Continued)