User manual

14
© 2005 PANORAMAdtv ALL rights reserved
AVMFlex-SA Series User Manual P/N 821624 Rev-A
I
J
K
Rear Panel Features
Section 2: Operation
Analog Audio Output (From SDI Input) Connectors (LEFT and RIGHT)
The ANALOG AUDIO OUT FROM SDI 3-pin male XLR connectors (LEFT and RIGHT) output analog audio signals
de-embedded from the SDI bitstream entering the SDI IN Connector (Item E, page 12). See the diagram under Item K for
pinout information for these connectors.
Balanced Analog Audio Input Connectors (LEFT and RIGHT)
The BALANCED AUDIO INPUT 3-pin female XLR connectors (LEFT and RIGHT) accept standard analog audio
signals and are configured for balanced 40K Ω impedance connections. Note that these inputs are relayed to the CVBS
input selection, and so are automatically selected for audio monitoring when the CVBS video input source is selected for
video monitoring (see Item 4, page 10). See the diagram under Item K for pinout information for these connectors.
Selected Balanced Analog Audio Output Connectors (LEFT and RIGHT)
The SELECTED BALANCED ANALOG AUDIO OUTPUT 3-pin male XLR connectors are analog outputs of the audio
source as selected for the left and right speakers. See the diagram below for pinout information for these connectors.
(Continued)
High (+)
Low (-)
Gnd
(Shield)
Pin-1 Pin-2
Pin-3
Pin-1
Gnd
(Shield)
Pin-2
High (+)
Pin-3
Low (-)
Female XLR Pinout Male XLR Pinout