User guide

© 2009 Wohler Technologies, Inc. All rights reserved.
7
AVMFlex58W Series User Guide
Specifications
Audio Outputs
2 XLR-M balanced
(selected source)
Line Output of Selected:
2 XLR-M
Line Output from SDI:
2 XLR-M
Peak Acoustic Output 98dB SPL medium @2 feet
Frequency Response
(1/6 Octave)
80 Hz to 20 Hz (± 5 dB) (-10 dB @ 50 Hz, 22 kHz)
Power Output
RMS each side = 5W, 7W peak
RMS dual woofer = 11W, 16W peak
Electrical Distortion <0.15% @ any level below input threshold
Hum and Noise Better than -68 dB below full output
Video Input Format 1 V peak to peak
CVBS (Composite Analog)
SDI video (with embedded
audio) SMPTE 259M
Video Input Connectors 2 CVBS BNC
1 CVBS BNC (B Input)
1 SDI BNC (A Input)
Video Input Termination CVBS: 75 Ω, selectable
CVBS: 75 Ω, selectable
SDI: 75 Ω
Video Output Connectors
2 CVBS BNC
(passive loop-through)
1 CVBS BNC
(passive loop-through)
1 SDI re-clocked output
1 CVBS BNC
(from SDI input)
Video Display Modes NTSC/PAL
Video Display Type Active Matrix TFT-LCD
Video Picture Controls Brightness, color, and tint (NTSC only)
Video Color
Configuration
RGB delta
Magnetic Shielding <1 gauss any adjacent surface
Power Supply Internal 100 to 240 VAC, 50-60 Hz
Power Consumption 20 Watts typical, 30W Max 22 Watts typical, 32W Max
Dimension (h x w x d)
(chassis only)
1.75 x 19 x 10 inches 44.5x 483 x 254 mm
Weight (chassis only) 9.5 lbs. (4.3 kg) w/ 6.8 VPOD
Table 1–1 Monitor Specifications (Both Models) (Continued)
Specification LP2S (Analog) Values
SA (Analog/SD-SDI)
Values