User guide

AVMFlex58W Series User Guide

Features

The display also has a power LED of its own and a bi-color (red/green)

tally indication LED.

All AVMFlex58W Series models come equipped with two 10-segment

tri-color (red/amber/green) LED bar graph display level meters,

separate volume and balance controls, a power indication LED,

headphone output, and a unique LED display, which visually shows

phase (polarity) relationships of the signals selected for monitoring.

Extensive magnetic shielding allows placement immediately adjacent

to video monitors with no color impurities.

The AVMFlex58W Series rear panels are each configured with two

video and audio sources linked by a IN A/IN B switch on the VPOD

video display module for simple A/V monitor switching.

The AVMFlex58W-LP2S has two CVBS analog video BNC inputs and

two stereo analog audio XLR input pairs. The audio and video sources

are linked so that the IN A/IN B switch selects between video A and

audio A or video B and audio B. It also includes CVBS looped outputs.

The AVMFlex58W-SA has one CVBS analog video BNC input, one

stereo analog audio XLR input pair, one SD-SDI video stream, and one

of four de-embedded SDI audio pairs as the sources. The audio and

video sources are linked to that the IN A/IN B switch selects between

CVBS video and analog audio, or SDI video and SDI audio. CVBS video

has a BNC loop output. The monitor also provides an analog output

converted from the selected SDI pair.

Common features of the rack-mounted monitor:

• Bi-amp sum amplification through high/mid and woofer speakers

• DB-25 connector on rear panel provided for tally connections

• A selectable analog audio stereo input on a balanced 3-pin XLR

connector

• Balanced analog output of selected audio source on two 3-pin XLR

connectors

• Two 10-segment tri-color (green/amber/red) LED bar graph display

audio level meters

• Phase indication LEDs for selected audio source

• 98 dB SPL at two feet