User guide

© 2009 Wohler Technologies, Inc. All rights reserved.
4
AVMFlex58W Series User Guide
Features
Audio Connections
Connection of the audio feeds is straightforward. Please refer to the
system interconnect block diagram (Figure 1–13 on page 23) for
clarification of the general signal paths into and out of the AVMFlex58W
Series units.
Cable Recommendations
Recommended cable type for analog video signals is: Belden 8281, Belden
1694A, or equivalent. Recommended cable type for analog audio signals
is: Belden 9451 or equivalent.
Sympathetic Vibration
Sympathetic vibration from other equipment (cables, etc.,) in the rack
may be serious enough to interfere with the unit’s sound quality out in
the listening area. The use of thin card stock and/or felt or foam weather-
stripping type materials between adjacent vibrating surfaces, or tying up
loose cables, etc., may be required to stop vibrations external to the unit.
Features
The AVMFlex58W Series of audio/video monitors provide the
capability to monitor CVBS video on a LCD display with full-fidelity
stereo audio monitoring in a single rack space (1U). The AVMFlex58W
Series models feature a VPOD LCD video display module mounted to
the front panel via a flexible gooseneck allowing for extensive control of
the viewing angle.
All models in the AVMFlex58W Series contain four high performance
speakers driven by three power amplifiers: two amplifier/driver
combinations handle midrange and high frequency information in
stereo, while the third center channel reproduces information below the
500 Hz crossover point. Output limiter circuits are incorporated to
protect the speakers.
The VPOD LCD Video Display is 5.8" (16:9), LCD size and features
controls for aspect ratio, color, tint/hue (NTSC only), and brightness.