User guide

AVMFlex58W Series User Guide

Technical Functional Overview

Video and VPOD Features

The VPOD LCD display module may be adjusted for two lengths (1.3"

and 2.25") by changing the location of two screws on the bottom of the

chassis which are lined up with the VPOD module. See Figure 1–12

below.

Figure 1–12 VPOD Gooseneck Adjustment

1. Locate the adjustment holes on the bottom of the main chassis that

correspond with the VPOD module.

2. Remove the two (2) installed screws and set aside for later use.

3. Carefully pull or push the VPOD module until the two holes of the

internal gooseneck mount line up with the appropriate two holes in

the chassis bottom. Ensure that the LCD display screen is not

touched or otherwise damaged during this operation.

4. Reinstall the two screws removed in step 2 into the new position.

Technical Functional Overview

Figure 1–13 on page 23 illustrates theAVMFlex58W functionality.

Caution:

Do not rotate (twist) the VPOD module around the gooseneck axis; the

torque may damage the gooseneck and/or internal wiring. Also, avoid

touching the LCD video screen itself with the fingers or other objects.