User guide

© 2009 Wohler Technologies, Inc. All rights reserved.
10
AVMFlex58W Series User Guide
Front Panel
Headphone Jack: Select the headphone audio sources as you would
for the internal speakers. When you plug in headphones, the speakers
will mute. This jack accepts a standard 1/4” phone type stereo plug.
Audio Level Meters: Audio levels are visually displayed via these two
10-segment, tri-color (red, amber, green) LED bar graph display level
meters. The left bar graph monitors Channel A while the right bar
graph monitors Channel B. These meters are able to display signal
levels using either PPM or VU standards as selected via a DIP switch
module accessible by removing the top cover of the unit. See Level
Meter Settings on page 20 for specifications and settings of these
meters.
Volume Control: This controls the loudness of the audio reproduced
by the internal speakers or connected headphone. Clockwise rotation of
this control increases the loudness of the monitored audio in both
Channels 1 and 2.
Balance: This knob adjusts the volume balance between the left and right
speakers.
AVMFlex58W-LP2-Specific Features
Figure 1–1 AVMFlex58W-LP2 Front Panel
Headphone Jack
Speakers
Phase Indicators
Audio Level Meters
Volume
Balance
Aspect
Input A/B Select
Signal Type Select
Tint (Hue)
Color Saturation
Brightness
LCD Screen
Tally
Power