User guide

821030: AMPx-S8 Series User Guide

Chapter 3 Audio Configuration

Monitoring and Mixing Modes

4. Press either the Up or Down arrow followed by the Enter button

to change the setting, or press the Escape button to leave it as is.

5. Press the Escape button again to return to normal operation.

Monitoring and Mixing Modes

Arbtrary Mixing

1. Press any of the eight speaker assign buttons to activate the mixing

(summing) feature. This mode is indicated by the LCD screen

showing MIX in the upper right and left of the display. See Figure

3–4 below for an example.

Figure 3–4 LCD screen: Speaker Assign

2. Each subsequent press of a speaker assign button assigns the

selected channel to the left, both, right or neither speaker channel.

All eight channels may be mixed/summed in this way. With each

successive button press, the color of the associated speaker assign

LED, and the mixing/routing of that channel, cycles through the

following sequence

Table 3–1 Speaker Assign Selection

Button Press Results

1st Green (routed to left speaker only)

2nd

Alternating Green and Amber

(routed to both left and right speakers)

3rd Amber (routed to right speaker only)

4th Off (not mixed or routed into either speaker)

MIX AES1 MIX

1 3

2 4 - -