User guide

821030: AMPx-S8 Series User Guide

Chapter 2 System Overview

Rear Panel Connectors

determine which audio pairs are de-embedded on these 75 ,

unbalanced, AES outputs. No other monitoring function affects

these outputs.

The pinout of this connector is the same as that for a standard VGA

cable. VGA cables may be used to break out the HD-15 connectors

into separate BNCs.

Figure 2–8 AES Unbalanced Out from SDI

HD-15 Pin-Out

• (Optional) Balanced AES Output from SDI Input (DB-25): This

connector outputs de-embedded audio. The last SDI input and

group selection determine which audio pairs are de-embedded on

these 110 , unbalanced, AES outputs. No other monitoring

function affects these outputs.

The pin-out for this connector is compatible with Tascam DB-25 to

XLR cable assemblies. Contact your Wohler sales representative for

availability. (Wohler’s contact information is on page ii of this

document.).

Note:

The DA model does not feature SDI capability.

Table 2–4 VGA Connector Pin-Out

SDI Channels Cable Color/Function

1 and 2 Red

3 and 4 Green

5 and 6 Blue

7 and 8 Grey/H-Sync.

Not Used Black/V-Sync.

Note:

You must specify either the balanced (DB-25) or the default

unbalanced (HD-15) output connector at the time you place

your order.