User guide

821030: AMPx-S8 Series User Guide

Chapter 1 Installation

Installation Recommendations

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Installation Recommendations

Mounting

The unit is designed to install into a standard 19" rack mounted at ear

level for best high frequency response and visual observation of the

monitor screen. Please adhere to the following clearances:

Heat Dissipation

The ambient temperature inside the mounting enclosure should not

exceed 40° Celsius (104° Fahrenheit). Adjacent devices can be rack

mounted (or stacked) in proximity to the unit if this temperature is not

exceeded. Otherwise, allow a 1RU (1.75”/44.45mm) space above and

below the unit for air circulation.

Sympathetic Vibration

Sympathetic vibration from other equipment (cables, etc.,) in the rack

may be serious enough to interfere with the unit’s sound quality. The

Clearance Surface

24” Front

3” Rear

2” Sides

1.75” Top and Bottom (if either radiates heat)

0” Top and Bottom (if no heat)

Important:

To reduce noise, the monitor does not have any fans. As a result, the

heat generated by the class D power amplifiers, power supplies, and

other components is vented by slots in the side of the unit. Therefore,

as a safety precaution, you must allow proper ventilation on both sides

of the unit.