User guide

AMP2A-10S User Guide

Applications

The AMP2A-10S are ideally suited for use in VTR bays, mobile

production vehicles, teleconferencing installations, multimedia

systems, satellite links and cable TV facilities, and on-air radio studios.

Specifications

Table 1–1 Audio and Power Specifications for the

AMP2A-10S

Specification Values

Analog Input Connectors 20 Phoenix Terminal Block (3-pin, male)

Analog Input Impedance 40K balanced

Peak Acoustic Out (@ 2’) 104 dB SPL

Power Output

RMS Each Side (4):

RMS Bass (4):

14 W transient / 10 W continuous

35 W transient / 25 W continuous

Frequency Response,

Sixth Octave

80 Hz - 16 kHz ± 5 dB)

(-10 dB @ 40 Hz, 20 kHZ)

Input Level for Maximum

Output (Volume Full On)

0 dBv balanced

Hum and Noise (analog) Better than -68 dB below full output

Distortion, Electrical

< 0.15% at any level below

input threshold

Distortion, Acoustic

6% or less at worst case frequencies

above 120 Hz, including cabinet

resonance; typically less than 1.5%

Input Overload +26 dBv balanced

Analog Out S/N >90 dB

Analog Out THD <0.008%

Magnetic Shielding <0.8 Gauss any adjacent surface

Power Consumption

(Average Maximum)

45 W

AC Mains Input 100-240VAC, 50-60 Hz Universal