User guide

82 10 30: AMP x-S 8 S eries Use r Gu ide
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
59
C hap te r 6 Features and Specifications
Sp ec if i c a tio ns
Specifications
Table 6–2 Specifications for the AMPx-S8 Series Monitors
Specification Value
Power Consumption 72 W max
AC Mains Input 100 to 240 VAC, 50 to 60 Hz
Analog Input Impedance 27K Ω balanced, minimum
AES Input Configuration 110 Ω balanced, 75 Ω unbalanced
Analog Input Overload +24 dBu balanced
Analog Reference +8, +6, +4, or 0 dBu
Digital Reference -20, -18, or -9 dBFS
Meter Dynamics (AES Scale) VU and PPM
Level Meter Scale (standard) AES
a
AES Input Sampling Rate
D to A Converter
32 to 48 kHz, autoselected
24-bit low jitter
Peak Acoustic Output (at 2 ft.) 104 dB SPL
Acoustic Distortion
6% or less at worst case frequencies above 140 Hz
including cabinet resonance; typically < 1.5%
Response, 6th Octave
80Hz to 18 KHz ± 5 dB
(-10 dB at 55 Hz, 21 kHz)
Distortion, Electrical <0.15% at any level below limit threshold
Hum and Noise, Analog Better than 68 dB below full output
Power Output
High Frequency
Low Frequency
6 W RMS (each channel)
14 W RMS
Converted Analog Out THD <0.008%
2RU Model Chassis Dimensions
3.5” H x 19” W x 12.5” D
(89 mm x 483 mm x 317.5 mm)
(Depth, including controls and knobs, is 14” [355.6
mm])
1RU Model Chassis Dimensions
1.75” x 19” x 11”
(4.5 mm x 483 mm x 30 mm)
(Depth, including controls and knobs, is 13.5”
[342.9 mm])
Weight
1RU: 13 lbs. (5.9 kg)
2RU: 18 lbs. (8.2 kg)