User guide

Figure 5–11 Erasing a Preset - Confirmation
Pressing the Enter button will erase that preset. Pressing the Esc
button will not erase that preset. In either case, control returns to the
menu to choose another preset to erase.
Figure 5–12 Erasing a Preset - Select the Preset to
Erase
Press the Esc button to exit Setup Mode and return to Normal
Monitoring Mode.
SDI Delay
This feature allows you to change the amount of delay added to the de-
embedded audio signals from the SDI inputs. This allows you to
compensate for video processing delays in external video signal chains
and monitors. This selection delays the monitored SDI audio and the
de-embedded SDI AES signals, but does not affect the reclocked SDI
output in any way.
Figure 5–13 SDI Delay
Step through settings using the Up or Down button, select 140 ms (for
example). To accept, press the Enter button. Press the Esc button to
exit Setup Mode and return to Normal Monitoring Mode.
Erase Preset?
Preset1: Off Air
Choose PresetNum
Preset2: VTR #2
Important:
This menu item is not available if this unit has no de-embedder card.
-Setup-
SDI Delay: 140 ms