User guide

82 10 30: AMP x-S 8 S eries Use r Gu ide
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
47
C hap te r 5 Setup Menu
Sa vi n g a Pr es et
Figure 5–2 Recalling an Existing Preset
4. Press the Up and Down buttons to scroll through the presets.
In the example above (Figure 5–2), Preset 1 is called Off Air
Off AirOff Air
Off Air. If a
particular preset is not assigned, it will be indicated as Unused
UnusedUnused
Unused, as
shown in Figure 5–3 below.
Figure 5–3 Creating a New Preset
5. Press the Enter button with the desired preset displayed to recall
that preset. The unit returns to normal operation, reconfigured
according to the settings in that preset.
Saving a Preset
1. Press the Fn+Setup buttons to display the Setup menu.
2. Press either the Up or Down buttons to display Save Preset
Save PresetSave Preset
Save Preset.
3. Press the Enter button.
Choose PresetNum
Preset1: Off Air
Choose PresetNum
Preset7: Unused
Decision Point:
If you want to create a brand new preset, continue on to Creating a
New Preset on page 48.
Otherwise, if you want to overwrite an existing preset, continue on to
Overwriting an Existing Preset on page 49.