User guide

8 21 03 0 : AM P x-S8 S er ie s U se r Gu id e
© 2 01 3 Woh le r Te ch nolo gie s, Inc . All ri g ht s res e rved.
32
Ch apt er 3 Au di o Co nfi gu ra tio n
SDI In p ut s
2. Now press the Group button more slowly to toggle between
Group 1/2
Group 1/2 Group 1/2
Group 1/2 and Group 3/4
Group 3/4 Group 3/4
Group 3/4 selections.
After this, rapid presses will again initiate the cycling as shown in
Table 3–3. Since the first two selections are more common choices,
this features allows easy toggling between them.
Configuring for SDI Delay
Modifying the SDI delay value allows you to precisely synchronize the
audio signal to a video signal. (The delay affects only the audio, not the
video.)
To change the SDI Delay setting:
1. Hold the Fn button while pressing the Setup button.
2. Press the Down button until the LCD screens SDI Delay
SDI DelaySDI Delay
SDI Delay as
shown in Figure 3–11 below.
Figure 3–11 SDI Delay in the Setup Menu
3. Press the Enter button to select the option. The LCD display to an
image similar to that shown in Figure 3–12 below.
Table 3–3 SDI Group Select
Button
Press
Left Bar Graph Bank
(1 through 4)
Right Bar Graph Bank
(5 through 8)
1st Group 1 Group 2
2nd Group 3 Group 4
3rd Group 1 Group 2
4th Group 1 Group 3
5th Group 1 Group 4
6th Group 2 Group 3
7th Group 2 Group 4
8th Group 3 Group 4
Important:
This function only works for SDI signal types.
848131 3.03
Setup: SDI Delay