User guide

82 10 30: AMP x-S 8 S eries Use r Gu ide

C hap te r 1 Installation

Co mp li a nc e

7. Protect the power cord from being walked on or pinched,

particularly at plug’s source on the equipment and at the socket.

8. Use only the attachments/accessories specified by the

manufacturer.

9. Unplug the equipment during lightning storms or when unused

for long periods of time.

10. Use of a cart is neither recommended nor approved by Wohler.

11. Refer all servicing to qualified service personnel. Servicing will be

required under all of the following conditions:

• The equipment has been damaged in any way, such as when

the power-supply cord or plug is damaged.

• Objects have fallen onto the equipment; or the equipment has

been exposed to rain or moisture, or liquid has been spilled

onto the equipment.

• The equipment does not operate normally.

• The equipment has been dropped.

Safety Symbols

Compliance

FCC

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

WARNING:

The symbol to the left warns of electric shock hazard inside the unit.

Disconnect the power cord before removing access panels when

installing upgrades. Only qualified service personnel are to operate the

equipment with covers removed, and are to exercise caution to avoid

personal injury.