User manual

© 2006 Wohler Technologies Inc. ALL rights reserved
3
AMP-S8 Series+ User Manual P/N 821640 Rev-B
Sect. 1: General Features and Specifications
General Features
and Specifications
Quick Start Guide
Description
Features
Applications
Specifications
Installation
Section 1
When in Normal Operational Mode, the software for this family of products allows three fast channel selection modes;
Single, Pair, and Downmix. See above images for button locations. Select channels as follows:
Single Channel Select: Channel selection for the left and right speakers are controlled independently.
Hold down the FN Button, press and release the SINGLE Button. Use the L-UP and L-DOWN Buttons to cycle up
or down through the channels to be assigned to the left speaker channel. Use the R-UP and R-DOWN Buttons to
cycle up or down through the channels to be assigned to the right speaker channel. Channels are selected for
monitoring as they are displayed in the LCD.
Pair Channel Select: Channels are selected in pairs (1/2, 3/4, 5/6, or 7/8) with the first channel in the pair
routed to the left speaker and the second routed to the right speaker.
Hold down the FN Button, press and release the PAIRS Button. Use the R-UP and R-DOWN Buttons or L-UP
and L-DOWN Buttons to cycle up or down through the channel pairs assignable to the left/right speaker
channels. Channels are selected for monitoring as they are displayed in the LCD.
Downmix Select: Pre-configured downmixes of multi-channel selections may be selected.
Hold down the FN Button, press and release the DOWNMIX Button. Use the R-UP and R-DOWN Buttons or
L-UP and R-UP Buttons to cycle up or down through the downmix selections. Downmixes are selected for
monitoring as they are displayed in the LCD.
Wohler AMP-S8 Series+
Quick Start Guide
Use the information below to quickly set up your Wohler AMP-S8 Series+ product for immediate use. The illustration
below is provided to help you locate and identify the programming buttons described in this quick start guide. See page
25 for more information about selecting channels and downmixes for monitoring.
MUTE
R
UP
DOWN
SINGLE
UP
DOWN
PAIRS
DOWNMIX
INPUT
GROUP
SETUP
ENTER
L
FN
O
ESC
LEFT
RIGHT
UP
INPUT
DOWN
GROUP
UPMUTE DOWN
SINGLE
FN
DWNMXPAIRS SETUP ENTERESC
SINGLE
Button
PAIRS
Button
DOWNMIX
Button
FN
Button
L UP and
L DOWN
Buttons
R UP and
R DOWN
Buttons
L UP and
L DOWN
Buttons
R UP and
R DOWN
Buttons
SINGLE
Button
PAIRS
Button
DOWNMIX
Button
FN
Button
AMP1-S8 (1U)
AMP2-S8 (2U)