User guide

Figure 6–10 Erasing a Preset - Choose the Preset
Number
The
Left and Right buttons select from among the available presets.
Once you press the Enter button to select a preset, the system will
warn you that the preset will be erased.
Figure 6–11 Erasing a Preset - Confirmation
Pressing the Enter button will erase that preset. Pressing the Esc
button will not erase that preset. In either case, control returns to the
menu to choose another preset to erase.
Figure 6–12 Erasing a Preset - Select the Preset to
Erase
Press the
Esc button to exit Setup Mode and return to Normal
Monitoring Mode
.
SDI Delay
This feature allows you to change the amount of delay added to the de-
embedded audio signals from the SDI inputs. This allows you to
compensate for video processing delays in external video signal chains
and monitors. This selection delays the monitored SDI audio and the
Choose PresetNum
Preset1: Off Air
Erase Preset?
Preset1: Off Air
Choose PresetNum
Preset2: VTR #2
Important:
This menu item is not available if this unit has no de-embedder card.