User guide

821016: AMPx-E8 Series User Guide

Chapter 3 Audio Configuration

SDI Inputs

Press of the Group button to cycle through each of the eight choices in

the following order:

• G11/2

• G13/4

• G21/2

• G23/4

• G31/2

• G33/4

• G41/2

• G43/4

Configuring for SDI Delay

Modifying the SDI delay value allows you to precisely synchronize the

audio signal to a video signal.

To change the

SDI Delay setting:

1. Hold the

Fn button while pressing the Setup button.

2. Press the

Down button until the LCD screens SDI Delay as

shown in Figure 3–11 below.

Figure 3–11 SDI Delay in the Setup Menu

3. Press the Enter button to select the option. The LCD display to an

image similar to that shown in Figure 3–12 below.

Example: G1

1/2 will appear on the bottom left hand side of the LCD screen when

the user wants to monitor a bitstream in the first sub-group of Group 1.

This corresponds to Channels 1 and 2 of an ordinary PCM embedded

audio signal. Similarly, G33/4 will appear when the user wants to

monitor a bitstream in the second sub-group of Group 3.

Important:

This function only works for SDI signal types.

848131 3.03

Setup: SDI Delay