Manual


Page38

Table 4–2: Meter Timings
Ballistics Rise
Fall
Level Change Time
VU Not Specified
IEC Type I
5 ms to reach -2
dB of settled
reading
-20 dB 1.7 sec.
IEC Type II
10 ms to reach -2
dB of settled
reading
-24 dB 2.8 sec
None Bar or Floating Segment Not Displayed
3. Bar: Pressing this button and then rotating the Trim knob steps through the
available settings for the bar ballistics. Refer to Table 4–1.
4. Reference: Pressing this button and then rotating the Trim knob adjusts the
reference. Refer to Table 4–1 for the reference standards for each scale.
Note: The AES scale does not allow you to set a reference.