Manual


Page37

Meter Type and Reference Menu
The Meter Type and Reference Menu allows you to define the level meter scale,
float, bar and reference.
Figure 4–11: Meter Type and Reference Menu
1. Scale: Pressing this button and then rotating the Trim knob steps through
the scales for the level meters. Six selections are available as shown in Table
4–1 below.
Table 4–1: Meter Limits and References
Scale
Bottom
Limit
Top
Limit
Default
Reference
Default Color
Bounds
Default
Ballistics
Lower Upper Float Bar
AES -72 dBFS 0.0 dBFS 0 dBFS = 0 dBFS -30 dBFS -20 dBFS
IEC
Type I
VU
VU -45 dBr +3.5 dBr -20 dBFS = 0 dBr -3 dBr 0 dBr - VU
Ext VU -56 Br
+16.0
dBr
-20 dBFS = 0 dBr -10 dBr 0 dBr - VU
BBC
(EBU)
-13.25 dBr
+13.0
dBr
-18 dBFS = 0 dBr 0 dBr 8 dBr -
IEC
Type II
Nordic -44 dBr
+12.5
dBr
-18 dBFS = 0 dBr -10 dBr 0 dBr -
IEC
Type I
DIN -53 dBr +5.5 dBr -15 dBFS = 0 dBr -5 dBr 0 dBr -
IEC
Type I
2. Float: Pressing this button and then rotating the Trim knob adjusts the
ballistics of the floating segment. The possible settings are shown in Table 4-
2.