Manual
Page13
Figure 2–3: Main Screen (Trim Adjusted)
USB Port Functionality
You can copy configuration files to and from your unit by using a flash drive
connected to the USB port. Configurations may also be created using the Wohler
AMP1-16-M Manager program in a PC and transferred to a USB flash drive which
can then be inserted into the unit. Refer to The USB Tab section of Chapter 3. You
can also use a flash drive to update the software in the AMP1-16-M. Refer to
Appendix D for instructions.
Immediately after connecting the flash drive to your AMP1-16-M, the Flash Drive
Options screen displays (interrupting any current functions except an Ethernet
connection) as shown in Figure 2-5 below. The menu flow for the USB Flash Drive
menus is shown immediately below in Figure 2-4. The Update Menu button will
only appear if the USB drive contains program update files. Refer to Appendix D.
Figure 2–4: Flash Drive Menu Tree