Manual


Page10

CHAPTER 2: Operation
Introduction
This chapter describes how to operate the AMP1-16-M from its front panel.
Main Screen
After powering up the AMP1-16-M and connecting an SDI input, you should see the
Main Screen, which will be similar to the one shown in Figure 2–1 below.
Fig 2–1: Main Screen
0
-60
-10
-20
-30
-40
-50
Left /
Right
Center
LFE
L/R
Surrnd
Bit
Stream
Pair
4
Pair
6
Pair
7
123456
123456
3 421 65 87 1211 1413 1615
109
Speaker Indicators
(Left and Right)
Speaker Indicators
(Both Channels)
Speaker Indicators
(Bitstream)
Speaker Indicators
- No Audio
(Left and Right)
Level Meters Phase Indicators
1. Speaker Indicators: The indicators above each meter identify the channel
number and the status of the channel.
Table 2-1: Channel Status Icon Descriptions
Attribute Symbol Description Meaning
Icon
Shape
Left Pointing Blue
Triangle
Channel configured to sound in the
left speaker
Right Pointing Blue
Triangle
Channel configured to sound in the
right speaker
Blue Square
Channel configured to sound in
both speakers