User guide

821697: AMP1-16 Series User Guide

Appendix B Establishing Connectivity

Connectivity Options

The fastest and simplest way to establish connectivity to your

AMP1-16-3G Series monitor is through a LAN (local area network).

Connecting to a LAN

Launching the Setup Tool

1. Connect the unit and your host PC to a LAN (local-area network).

2. Run the NetBurner IP Setup Tool.

3. You should see something similar to the dialog shown in Figure B–

1 below. This dialog shows a NetBurner module fresh from the Wohler

factory.

Figure B–1 NetBurner IPSetup Dialog - Unconfigured

4. If multiple NetBurner modules appear in the

Select a Unit box, be

sure to highlight the unit you are working with.

Decision Point:

If you are if you are connected to a LAN, continue with the following

procedure.